6600 INJECTOR HEAD


An Injector head is the primary component of a capillary injection system. During installation, the operator routes capillary tubing from the spooler to the top of the injector and passes it through the sheave alignment wheel. A series of grooved wheels aid alignment and pre-straighten the tubing prior to entering the gripper blocks which are integrated into the drive chains. The dual chain configuration utilizes two opposing chains with integrated gripper blocks to push (inject) or pull tubing via hydraulic cylinder traction system.


 Data Sheet 6600 IH


Performance Features

Pull Capacity

5,000 lb [2268 kg]1

Snub Capacity

2,500 lb [454 kg]1

Tubing Range

Ø1/4”, Ø3/8” and Ø5/8”2

Velocity

Variable speed from 3 ft/min to 250 ft/min1

Sheave Wheel

Minimum Ø20”

1 Max speeds and pull are based on 100% efficiency and may diminish slightly due to wear of components

2 Ø5/8” tubing requires gooseneck kit, sold separately

Physical Characteristics

Tare Weight [Frame]

500 lb [227kg]

Payload

2,500 lb [1134 kg]

MGW

3,000 lb [1361 kg]

Length

40” [1016 mm]

Width

36” [915 mm]

Height

82” [2083 mm]

HYDR Power Requirements

Max Pressure

3,000 psi [207 bar]

Min Flow

≥ 10 GPM [38 LPM]

Max Flow

≤ 35 GPM [132LPM]

Standard Options

Sling Set

Pull Tested

Quad Pod

Includes various adapters

Heat Treated Gripper Blocks

Dual Ø1/4” and Ø3/8”
Single Ø1/4” or Ø3/8”

Available Certifcations3

DNV

2.7-3  

 

MACHINERY, ATEX

3Not standard, must be requested.